- The SunFounder 250 quadcopter is tailored for hobbyists and beginners for FPV flying.
- This aircraft is light in structure with its propeller blades featuring high strength, explosive-resistant and small wind resistance due to their smooth design.
- It runs the firmware of CC3D flight controller, working with the MT2204-2300KV motor and 12A ESC.
- Weight: 519g; Duration of flight: 7 minutes;Working voltage: 11.1V
- CC3D software debugging guide and the assembling videos of the aircraft are provided for you.
Introduction The realization of FPV flying starts from having a SunFounder 250 aircraft. The SunFounder 250 Quadcopter is tailored for the hobbyists for FPV flying. It features stability, flexibility and activity. You can realize a stable flight in a high or low altitude or in a forest with the SunFounder 250. The skid landing damping sponge tubes bound onto the motors help stablize the flight and protect the frame through increasing the buffer between the frame and the land when the aircraft is landing. It runs the OpenPilot firmware of the flight controller firmware and the 12A brushless electronic speed controller. This kit is designed to meet the hobbyists’ higher requirement of flying the aircraft. You can realize a stable flight in a small space or a rapid 3D flight based on your own configuration and parameter setting.
1 * Quadcopter Frame (set) 4 * MT2204-2300KV CW /CCW Motor 1 * Balance Charger 1 * Battery Indicator 1 * Power Adapter 4 * 12A ESC 1 * Li-Po Battery 4 * CW/ CCW Propellers 1 * CC3D Flight Controller 1 * Adapter Cable 1 * USB Cable 1 * Heat Shrink Tubing 5* 3M glue 20* Nnylon Zip Ties 4 * Damping pipe 24* Banana Bullet Connector 1 * Damping plate (set) 1 * Section Board 1 * Lashing 1 * Allen Wrench 1* Velcro Tape
0 out of 5 (0 Ratings)
5 Stars (0)
4 Stars (0)
3 Stars (0)
2 Stars (0)
1 Star (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
Most Popular from Category
Walkera Rodeo 150 BNF without remote control 5.8G 40CH quadcopter with 600TVL Night Vision Camera 3D Aerobatic FPV Racer BNF
ORX rc 2.4G 6ch transmitter radio RC Receiver 2.4g 3-position flap Surpass DX6i JR FUTABA for Helicopters Airplanes Quadcopters
New Arrival Eachine Racer 250 FPV Drone F3 NAZE32 CC3D w/ Eachine I6 2.4G 6CH Remote Control VTX OSD RTF RC Multicopter Drones
Hubsan X4 H502S H502E RC Quadcopter Spare Parts 5.8G Image Transmission Module For RC Camera Drone Helicopter Accessories
Mavic Pro Shoulder Case Combo Waterproof Nylon Bag Portable Shoulder Bags for Mavic Pro Camera for DJI Spark Drone
T series MJX T611 wire control 3ch rc helis with gyro mjx t11 heli
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.